Low Battery amp; Overload Indication
"Lo" is shown when the battery power is low. The scale will turn off after a few seconds, please replace with new batteries.
"ERR" is shown when the scale is overload. Please remove the weight on the scale immediately to protect the sensors.
|
Calibrate to "0.0"
1. Gently step on the scale and the scale will automatically activate, start your weighing after it displays "0.0"
2. Re-calibrate the scale to "0.0" after moving, shifting or replacing batteries.
Tips: Step on the scale with one foot until the display lights up, then step off. The scale will show â0.0,â indicating the calibration was successful.
|
Weight Measurement
For best accuracy, please place the digital bathroom scale on a hard and flat surface, and stand on the central area. Avoid carpet or soft surface.
When you step onto the scale, it will calculate numbers and blink three times then quickly settle on a weight. It will turn off automatically after 10 seconds.
|